proFPGA

News

November 2017
PRO DESIGN announces Partnership with AcconSys as new Distributor in China and Hongkong for its proFPGA Product Family [more]
June 2017
PRO DESIGN Expands Prototyping Portfolio with ultra-fast proFPGA Virtex® UltraScale+™ based FPGA Modules [more]
February 2017
PRO DESIGN Launches Intel® Stratix® 10-based High-Speed Multi FPGA Prototyping Solution [more]
proFPGA Interconnectboard EW
proFPGA Interconnectboard East-West

The proFPGA Interconnectboard East-West connects two adjacent extension site connectors (East-West direction). Over the length matched high-performance board up to 150 I/0s can be connected with the maximum point to point performance depending on the used FPGA type. The board can be used with single ended and differential connections.

more information >>

proFPGA Interconnectboard EW
proFPGA Interconnectboard North-South

The proFPGA Interconnectboard Nort-South connects two adjacent extension site connectors (North-South direction). Over the length matched high-performance board up to 150 I/0s can be connected with the maximum point to point performance depending on the used FPGA type. The board can be used with single ended and differential connections.

more information >>

proFPGA Interconnectboard EW
proFPGA Interconnectboard 4-WAY

The proFPGA Interconnectboard 4-WAY connects four adjacent extension site connectors (North-South and East-West directions). The board connects the same I/O pins of all 4 connectors allowing up to 148 4-way connections.

more information >>

proFPGA Interconnectboard EW
proFPGA Riser Interconnect Board

The proFPGA Riser Interconnect Board provides a proFPGA Bottom and a proFPGA Top Connector. It is used wherever due to height incompatibility two different extension boards cannot be plugged on-top of each other.

more information >>

proFPGA Interconnectboard EW
proFPGA Breakout Interconnect Board

The proFPGA Breakout board provides the ability to spread a single proFPGA-Connector up to three proFPGA-V1-Connectors

more information >>

proFPGA Interconnectboard EW
proFPGA TA1V1/TAV2 Adapter Board

The proFPGA TA1V1/TA2V1TA2 Adapter Board kit consists of two boards which allow to convert the proFPGA V1 connectors on the FM-XCVU400 FPGA modules to regular proFPGA V0 connectors. One of the two board is dedicated to the TA1V1 connector and the second board is dedicated to the TA2V1 connector

more information >>

proFPGA Interconnectboard EW
proFPGA Interconnect Cable

The proFPGA Interconnect Cable connects any 2 extension site connectors of the proFPGA system together. Over the length matched high-performance cables up to 147 I/0s can be connected with a maximum point to point performance depending on the used FPGA type. The board can be used with single ended and differential connections. It is available in 400 mm or 800 mm length.

more information >>

proFPGA Interconnectboard EW
proFPGA Interconnect Cable (70pin)

The proFPGA Interconnect Cable connects any 2 extension site connectors of the proFPGA system together. Over the length matched high-performance cables up to 52 I/0s can be connected with a maximum point to point performance depending on the used FPGA type. The board can be used with single ended and differential connections. It is available in 400 mm or 800 mm length.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR4 2.5 GB SDRAM Board

The proFPGA DDR4 2.5 GB SDRAM Board occupies one extension site of the proFPGA system and offers up to 2.5 GB DDR4 SDRAM memory and can be accessed over a 80bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 2133 Mbps. Besides the board offers three push-buttons and 8 on board LEDs, which can we used for debugging purpose.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR4 5 GB SDRAM Board

The proFPGA DDR4 5 GB SDRAM Board occupies one extension site of the proFPGA system and offers up to 5 GB DDR4 SDRAM memory and can be accessed over a 80bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 2133 Mbps. Besides the board offers three push-buttons and 8 on board LEDs, which can we used for debugging purpose.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR4 9 GB SDRAM Board

The proFPGA DDR4 9 GB SDRAM Board occupies one extension site of the proFPGA system and offers up to 9 GB DDR4 SDRAM memory and can be accessed over a 72bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 526 MHz (1052 MT/s). Besides the board offers three push-buttons and 8 on board LEDs, which can we used for debugging purpose.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR4 18 GB SDRAM Board

The proFPGA DDR4 18 GB SDRAM Board occupies one extension site of the proFPGA system and offers up to 18 GB DDR4 SDRAM memory and can be accessed over a 72bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 526 MHz (1052 MT/s). Besides the board offers three push-buttons and 8 on board LEDs, which can we used for debugging purpose..

more information >>

proFPGA Interconnectboard EW
proFPGA LPDDR4 Board

The proFPGA LP DDR4 SDRAM Board occupies one extension site of the proFPGA system and offers with 2x Samsung K4F8E304HB-MGCJ memory devices 2 GByte LPDDR4-3200 capacity. Besides the board offers three push-buttons and 3 on board LEDs.

more information >>

proFPGA Interconnectboard EW
proFPGA LPDDR2 Board

The proFPGA LPDDR2 Board occupies one extension site of the proFPGA system and offers 2x two GBit Winbond W97BH2KBQX memory devices which can be accessed over a 32bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 800 Mbps. Besides the board offers three push-buttons, 16 on board LEDs and 2 SoftTouch connectors, which can we used for debugging purpose.

more information >>

proFPGA Interconnectboard EW
proFPGA Flash Board

The proFPGA Flash Board occupies one extension site of the proFPGA system and offers 128 Gbit ONFI flash, 512 Mbit quad SPI flash, 1 Mbit NVSRAM, 1 Mbit quad SPI MRAM, Debug interface for ONFI flash with 38-pin MICTOR connector, debug interface for all SPI signals of all SPI devices, 2 x I²C 64 kbit EEPROMs, 1 x debug interface for each I²C EEPROM, etc..

more information >>

proFPGA Interconnectboard EW
proFPGA SRAM Board

The proFPGA SRAM Board occupies one extension site of the proFPGA system and offers up to 144 Mbit memory depth per SRAM accessed over a 18 bit databus. The proFPGA SRAM Board is available in three different comfigurations. Depending on the used SRAM type you can run with 250 MHz, 300 MHz or 333 MHz. Further the board offers 5 LEDs for debugging.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR3 2 GB SDRAM Board

The proFPGA DDR3 SDRAM Board occupies one extension site of the proFPGA system and offers 2 GB DDR3 SDRAM memory and can be accessed over a 64 bit or 72 bit databus. Due to the length matched board design, it can be used with a performance of up to 1600 Mbps. Besides, the board offers 10 user LEDs, which can be used for debugging purposes.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR3 4 GB SDRAM Board

The proFPGA DDR3 SDRAM Board occupies one extension site of the proFPGA system and offers 4 GB DDR3 SDRAM memory and can be accessed over a 64 bit or 72 bit databus. Due to the length matched board design, it can be used with a performance of up to 1600 Mbps. Besides, the board offers 10 user LEDs, which can be used for debugging purposes.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR3 SO-DIMM Adapter Board

The proFPGA DDR3 SO-DIMM Adapter Board occupies one extension site of the proFPGA system and offers a SO-DIMM socket for standard DDR3 memory modules. Due to the length matched board design, the daughter boards can be used with a performance of up to 800 Mbps. Besides, the board offers 10 user LEDs, which can be used for debugging purposes.

more information >>

proFPGA Interconnectboard EW
proFPGA Multi Memory Board

The proFPGA Multi Memory Board occupies one extension site of the proFPGA system and provides 3 different types of memory with several debug opportunities like: 16 Mbit SRAM (CY62167EV18), 256 Kbit MRAM (MR256D08B), 512 Mb NOR Flash (JS28F512M29EWHA), 2x Buttons for debugging, 4x LEDs (green, red, yellow, blue) for debugging and 4x 1.8V GPIO-Pins for debugging, 2x MICTOR Connectors for debugging.

more information >>

proFPGA Interconnectboard EW
proFPGA Adapter Board for Juno ARM Development Platform

The proFPGA Adapter Board provides a method of interconnecting the proFPGA prototyping systems with the ARM Juno Development Platform, is a software development platform for ARMv8-A. It includes the Juno Versatile Express board and an ARMv8-A reference software port available through Linaro.


more information >>

proFPGA Interconnectboard EW
proFPGA PCIe gen1 8-lane Kit

This kit contains all required components to prototype and verify user designs, which have a PCIe gen1 interface. The kit consists of a proFPGA PCIe gen1 8-lane daughter card, which will be plugged on a free extension site of the proFPGA FPGA Module, which provides the required high speed serial transceivers (MGTs), a PCIe gen1 8-lane host interface card and a dedicated high performance cable.

more information >>

proFPGA PCIe Gen2
proFPGA PCIe gen2 4-lane Kit

This kit contains all required components to prototype and verify user designs, which have a PCIe gen2 interface. The kit consists of a proFPGA PCIe gen2 dual 4-lane daughter card, which will be plugged on a free extension site of the proFPGA FPGA Module, which provides the required high speed serial transceivers (MGTs), 1x PCIe gen2 4-lane host interface card and a dedicated high performance cable.

more information >>

proFPGA Interconnectboard EW
proFPGA PCIe gen3 8-lane Kit

This kit contains all required components to prototype and verify user designs, which have a PCIe gen3 interface. kit consists of a proFPGA PCIe gen3 8-lane daughter card, which will be plugged on a free extension site of the proFPGA FPGA Module, which provides the required high speed serial transceivers (MGTs), 1x PCIe gen3 8-lane host interface card and a dedicated high performance cable.

more information >>

proFPGA Interconnectboard EW
proFPGA Mini PCIe Host Card

The proFPGA Mini PCIe Host Interface Card provides 1-lane PCIe gen2 cable connection to a subsystem. It is designed to fit into a mini PCIe slot. Because of the connector, the size is not conforming to the PCIe specification. It is used to build up a PCIe connection between a Mini PCIe subsystem and the proFPGA system in combination with a PCIe extension board.

more information >>

proFPGA Interconnectboard EW
proFPGA PCIe gen3 Root Complex Board

The proFPGA PCIe gen3 Root Complex Board has a PCIe x16 socket where 8 MGT lanes are connected and an M.2 socket with Key M where 4 MGT lanes are connected. In addition to this it offers a 12V power connector if the PCIe card draws too much current, 3 LEDs and one push button for user usage.

more information >>

proFPGA Interconnectboard EW
proFPGA PCIe gen2 8-lane Connector Board

The proFPGA PCIe gen2 8-lane Connector Board will be plugged on an free extension site of for example the proFPGA XC7V2000T FPGA Module, which provides the required high speed serial transceivers (MGTs).

more information >>

proFPGA Interconnectboard EW
proFPGA SATA Interface Board

The proFPGA SATA Interface Board occupies one extension site of the proFPGA system and provides 8 channels which run up to 12.5 Gbps on 8 SATA connectors (4x HOST, 4x DEVICE) and which support SATA Host and Device connections. The board offers Pericom PI3EQX1204 SATA redrivers to enable a flexible high speed connection using SATA cables with a lengh of up to 1 m and more.

more information >>

proFPGA Interconnectboard EW
proFPGA DVI Interface Board

The proFPGA DVI Interface Board occupies one extension site of the proFPGA system and provides 1x DVI Transmitter (TI TFP410) and 1x DVI Receiver (TI TFP403) and runs with up to 165 MHz pixel rates (including 1080p and WUXGA @ 60 Mhz). Further the board provides 8x general purpose LEDs and one Mictor-38 debug connector.

more information >>

proFPGA Interconnectboard EW
proFPGA MIPI Interface Board

The proFPGA MIPI Interface Board occupies one extension site of the proFPGA system and provides 2x camera interfaces, each with one clock lane and up to four data lanes which offer transfer rates of up to 2.5 Gbps (HS mode) and 20 MBps (LPDT mode). Further the board provides 8x GPIO, I2C, and a reference clock is available for each camera Interface and one proFPGA top connector to make unused I/Os available.

more information >>

proFPGA Interconnectboard EW
proFPGA QSFP Interface Board

The proFPGA QSFP Interface Board occupies one extension site of the proFPGA system and provides 2x QSFP+ connectors. Further the board provides a programmable clock generator for MGT_REFCLK pins, a fixed frequency clock generator (100 MHz) for MGT_REFCLK pins and one proFPGA top connector to make unused IOs available.

more information >>

proFPGA Interconnectboard EW
proFPGA Gigabit Ethernet Interface Board

The proFPGA Gigabit Ethernet Interface Board occupies one extension site of the proFPGA system and pro- vides two Gigabit PHYs supporting 10M/100M/1G and MMI/GMI/RGMII. Further the board provides 5x status LEDs per PHY (duplex, 1G, 100M, 10M, activity) and one proFPGA top connector to make unused FPGA signals available.

more information >>

proFPGA Interconnectboard EW
proFPGA USB 2.0 & 3.0 Interface Board

The proFPGA USB 2.0 & 3.0 Interface Board occupies one extension site of the proFPGA system and provides two USB ports. One USB port is available through a mini USB connector and is connected to a USB3250 (Microchip). The USB3250 is a hi-speed USB device transceiver with UTMI interface. This USB port can be used to implement a USB 2.0 device in the FPGA with UTMI interface.

more information >>

proFPGA Interconnectboard EW
proFPGA USB 3.0 Interface Board

The proFPGA USB 3.0 Interface Board occupies one extension site of the proFPGA system and provides two USB 3.0 A female connectors which can be used either in host or in device mode. The USB 3.0 connection is provided with the TUSB1310A from Texas Instruments.

more information >>

proFPGA Interconnectboard EW
proFPGA SoftTouch Board (Keysight)

The proFPGA SoftTouch Debug Board (Keysight) occupies one extension site of the proFPGA system and offers various connectors and interfaces for debugging purposes. It provides 3x SoftTouch Connectors to interface the proFPGA system to standard Logic Analyzers (Keysight), one 16x2 pin connector for general purpose IOs, one USB-UART debug interface over a micro USB connector, one CPUARM JTAG interface and 16 LEDs.

more information >>

proFPGA Interconnectboard EW
proFPGA SoftTouch Board (Tektronix)

The proFPGA SoftTouch Debug Board (Tektronix) occupies one extension site of the proFPGA system and offers various connectors and interfaces for debugging purposes. It provides 3x SoftTouch Connectors to interface the proFPGA system to standard Tektronix Logic Analyzers, one 16x2 pin connector for general purpose IOs, one USB-UART debug interface over a micro USB connector, one CPUARM JTAG interface and 16 LEDs.

more information >>

proFPGA Interconnectboard EW
proFPGA LAB & Debug Board

The proFPGA LAB & Debug Board occupies one extension site of the proFPGA system and offers various connectors and interfaces for debugging purposes. It provides 3x Mictor connectors to connect the proFPGA system to standard Logic Analyzers or other measurement equipment.

more information >>

proFPGA Interconnectboard EW
proFPGA LAB & Debug Board SWD IO

The proFPGA LAB & Debug Board SWD IO occupies one extension site of the proFPGA system and offers various connectors and interfaces for debugging purposes. It provides among others 2 x Mictor connectors to interface the proFPGA system to standard Logic Analyzers or other measurement equipment, one 20x2 pin connector for general purpose IOs, one USB-UART debug interface over a micro USB connector, one CPUARM JTAG interface, 16 LEDs, a single push button, a Mini Sim Slot (2FF) and a μSD-Card slot.

more information >>

proFPGA Interconnectboard EW
proFPGA MGT Debug Board

The proFPGA MGT Debug Board occupies one extension site of the proFPGA system and offers various MMCX connectors and interfaces for debugging purpose. It provides 2x 125 MHz differential (LVDS) clock outputs via MMCX connectors,12 differential MGT TX outputs via MMCX connectors, 12 differential MGT RX inputs via MMCX connectors and 4 differential MGT REFCLK inputs via MMCX connectors.

more information >>

proFPGA Interconnectboard EW
proFPGA FMC LPC Mezzanine Adapter Board

The proFPGA FMC LPC Mezzanine Adapter Board occupies one extension sites of the proFPGA system and provides a LPC (low pin count) connector which is compliant to the FMC standard [FMC] and supports a wide portfolio of FMC Mezzanine boards. Beside it provides 68 FMC bank A signals (34 differential signals), 2 x differential unidirectional clk signals, 1 x differential REFCLK signals for MGTs and 1 x differential MGT signal (1 RX and 1 TX.)

more information >>

proFPGA Interconnectboard EW
proFPGA FMC Mezzanine Adapter Board

The proFPGA FMC Mezzanine Adapter Board occupies two extension sites of the proFPGA system and provides a HPC (high pin count) connector which is compliant to the FMC standard [FMC] and supports a wide portfolio of FMC Mezzanine boards. Beside others it provides 1 FMC connector on the top side, 116 FMC bank A signals (58 differential signals) and 44 FMC bank B signals (22 differential signals).

more information >>

proFPGA Interconnectboard EW
proFPGA FMC Carrier Card Adapter

The proFPGA FMC Carrier Card Adapter occupies one extension site of the proFPGA system and provides a connection between a FMC carrier card and the proFPGA system. It provides 2 proFPGA cable connectors (top-side), 1 FMC HPC (high pin count) connector (bottom side), 40 MMCX connectors for MGT signals (10 MGT RX and TX pairs), 4 MMCX connectors for MGT REFCLK signals (2 MGT Refclk pairs).

more information >>

proFPGA ADC Interface Board
proFPGA ADC Interface Board

The proFPGA ADC Interface Board occupies one extension site of the proFPGA system and has two 16-bit 250MSPS ADCs. Each ADC has one channel. The two input channels of the ADCs are connected with an input filtering stage to MMCX connectors. Both ADCs are directly connected to the bottom connector. Each ADC channel has its own analog ground and a shielding. The shielding is removable for customizing the filtering circuit.

more information >>

proFPGA DAC Interface Board
proFPGA DAC Interface Board

The proFPGA ADC Interface Board occupies one extension site of the proFPGA system and provides a dual, 16bit digital-to-analog converter that supports sample rates up to 1600MSPS. Both DAC outputs are connected via analog filter stages to MMCX connectors. A programmable clock generator is available to provide clocks to the DAC and optionally to the FPGA and MMCX connectors.

more information >>

proFPGA Multi Interface Board
proFPGA Multi Interface Board

The proFPGA Multi Interface Board occupies one extension site of the proFPGA system and provides 1x SGPIO connector, 2x MiniUSB UART connectors,1x EJTAG connector, 8 GPIO pins available, 2x DIP sockets, 1x I²C Connector, I²C Fan Control Unit, PMBus 6-channel Power-Supply Manager, PMBus Isolated Power-Supply Controller, 2x I²C EEPROM, 2x 128M SPI Flash, 8 RGB LEDs and one proFPGA Top Connector.

more information >>

proFPGA Multi Interface Board
proFPGA Multi Interface Board 2

The proFPGA Multi Interface Board2 occupies two extension site of the proFPGA system and provides CAN Controller (SPI Interface) and CAN Transceiver, LIN Transceiver, QSPI Flash 500 Mb/1 Gb, I2S Audio CoDec, Stereo Audio Input & Output via 3.5 mm Jack, 2x I²C EEPROM, SD Card Slot, Full Size, UHS-I capable, quad USB to UART converter, Lauterbach ARM JTAG/ETM Debugger connection.

more information >>

Partners
Xilinx Logo
Altera Logo
Linear
© 2017 PRO DESIGN Electronic GmbH. All Rights Reserved. Use of this site signifies your agreement of the Terms of Use.