proFPGA

News

November 2017
PRO DESIGN announces Partnership with AcconSys as new Distributor in China and Hongkong for its proFPGA Product Family [more]
June 2017
PRO DESIGN Expands Prototyping Portfolio with ultra-fast proFPGA Virtex® UltraScale+™ based FPGA Modules [more]
February 2017
PRO DESIGN Launches Intel® Stratix® 10-based High-Speed Multi FPGA Prototyping Solution [more]
proFPGA Interconnectboard EW
proFPGA DDR4 2.5 GB SDRAM Board

The proFPGA DDR4 2.5 GB SDRAM Board occupies one extension site of the proFPGA system and offers up to 2.5 GB DDR4 SDRAM memory and can be accessed over a 80bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 2133 Mbps. Besides the board offers three push-buttons and 8 on board LEDs, which can we used for debugging purpose.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR4 5 GB SDRAM Board

The proFPGA DDR4 5 GB SDRAM Board occupies one extension site of the proFPGA system and offers up to 5 GB DDR4 SDRAM memory and can be accessed over a 80bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 2133 Mbps. Besides the board offers three push-buttons and 8 on board LEDs, which can we used for debugging purpose.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR4 9 GB SDRAM Board

The proFPGA DDR4 9 GB SDRAM Board occupies one extension site of the proFPGA system and offers up to 9 GB DDR4 SDRAM memory and can be accessed over a 72bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 526 MHz (1052 MT/s). Besides the board offers three push-buttons and 8 on board LEDs, which can we used for debugging purpose.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR4 18 GB SDRAM Board

The proFPGA DDR4 18 GB SDRAM Board occupies one extension site of the proFPGA system and offers up to 18 GB DDR4 SDRAM memory and can be accessed over a 72bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 526 MHz (1052 MT/s). Besides the board offers three push-buttons and 8 on board LEDs, which can we used for debugging purpose..

more information >>

proFPGA Interconnectboard EW
proFPGA LPDDR4 Board

The proFPGA LP DDR4 SDRAM Board occupies one extension site of the proFPGA system and offers with 2x Samsung K4F8E304HB-MGCJ memory devices 2 GByte LPDDR4-3200 capacity. Besides the board offers three push-buttons and 3 on board LEDs.

more information >>

proFPGA Interconnectboard EW
proFPGA LPDDR2 Board

The proFPGA LPDDR2 Board occupies one extension site of the proFPGA system and offers 2x two GBit Winbond W97BH2KBQX memory devices which can be accessed over a 32bit databus. Due to the length matched board design, the daughter boards can be used with performances of up to 800 Mbps. Besides the board offers three push-buttons, 16 on board LEDs and 2 SoftTouch connectors, which can we used for debugging purpose.

more information >>

proFPGA Interconnectboard EW
proFPGA Flash Board

The proFPGA Flash Board occupies one extension site of the proFPGA system and offers 128 Gbit ONFI flash, 512 Mbit quad SPI flash, 1 Mbit NVSRAM, 1 Mbit quad SPI MRAM, Debug interface for ONFI flash with 38-pin MICTOR connector, debug interface for all SPI signals of all SPI devices, 2 x I²C 64 kbit EEPROMs, 1 x debug interface for each I²C EEPROM, etc..

more information >>

proFPGA Interconnectboard EW
proFPGA SRAM Board

The proFPGA SRAM Board occupies one extension site of the proFPGA system and offers up to 144 Mbit memory depth per SRAM accessed over a 18 bit databus. The proFPGA SRAM Board is available in three different comfigurations. Depending on the used SRAM type you can run with 250 MHz, 300 MHz or 333 MHz. Further the board offers 5 LEDs for debugging.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR3 2 GB SDRAM Board

The proFPGA DDR3 SDRAM Board occupies one extension site of the proFPGA system and offers 2 GB DDR3 SDRAM memory and can be accessed over a 64 bit or 72 bit databus. Due to the length matched board design, it can be used with a performance of up to 1600 Mbps. Besides, the board offers 10 user LEDs, which can be used for debugging purposes.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR3 4 GB SDRAM Board

The proFPGA DDR3 SDRAM Board occupies one extension site of the proFPGA system and offers 4 GB DDR3 SDRAM memory and can be accessed over a 64 bit or 72 bit databus. Due to the length matched board design, it can be used with a performance of up to 1600 Mbps. Besides, the board offers 10 user LEDs, which can be used for debugging purposes.

more information >>

proFPGA Interconnectboard EW
proFPGA DDR3 SO-DIMM Adapter Board

The proFPGA DDR3 SO-DIMM Adapter Board occupies one extension site of the proFPGA system and offers a SO-DIMM socket for standard DDR3 memory modules. Due to the length matched board design, the daughter boards can be used with a performance of up to 800 Mbps. Besides, the board offers 10 user LEDs, which can be used for debugging purposes.

more information >>

proFPGA Interconnectboard EW
proFPGA Multi Memory Board

The proFPGA Multi Memory Board occupies one extension site of the proFPGA system and provides 3 different types of memory with several debug opportunities like: 16 Mbit SRAM (CY62167EV18), 256 Kbit MRAM (MR256D08B), 512 Mb NOR Flash (JS28F512M29EWHA), 2x Buttons for debugging, 4x LEDs (green, red, yellow, blue) for debugging and 4x 1.8V GPIO-Pins for debugging, 2x MICTOR Connectors for debugging.

more information >>

Partners
Xilinx Logo
Altera Logo
Linear
© 2017 PRO DESIGN Electronic GmbH. All Rights Reserved. Use of this site signifies your agreement of the Terms of Use.